Notes on Cisco QoS: Clearing the fog – Part 2. Quality issues

Quality of Service

QOS = Method of giving priority to some specific traffic as moving over the network.

The basic aim of QoS is to have a consistent and predictable performance on your network.

 

1 qos intro

General characteristics of today’s Converged Network:

  • Small voice packet compete with bursty data packets, many different applications are using network as services
  • Critical traffic must get priority over less critical traffic, without QoS, default behavior is First In First Out (FIFO)
  • Voice and video traffics are time-sensitive
  • Outages are not acceptable

 

Converged Network Quality issues:

  • Lack of Bandwidth
  • Packet Loss
  • Delay
  • Jitter

 

Bandwidth

2 Bandwidth Measure.png

  • Maximum available bandwidth is the slowest link on the traffic paths
  • On the same physical links (traffic paths), multiple flows compete for the same bandwidth, multiple applications sharing the same bandwidth
  • Lack of bandwidth causes performance degradation on network applications

 

 

Packet Loss

3 Tail Drop due to Queue Congestion

Packet loss due to Tail Drop: Queue only can so much packets and once it is full and more packets arrive at the tail end of the queue before the queue is emptied (due to link congestion etc.), the packets will be dropped, and this behavior is called ‘Tail Drop’. If the tail drop occurs to the time sensitive traffics such as voice and video, the effects are immediately felt by the users on the flow. If this happens to data traffic, it may interrupt file transfer and corrupt the file.

 

 

Delay

4 Types of Delay

  • Processing Delay – time taken by router to process packets from an input interface and put them into the output queue of output interface
  • Queuing Delay – time a packet resides in the output queue of a router
  • Serialization Delay – time taken to place bits on the wire
  • Propagation Delay – time taken for packets to cross links from one end to the other end

 

 

Jitter

5 Jitter

  • Packets from a source will reach a destination with different delay times
  • Congestion on the network will cause jitter
  • Congestion can occur at a router interface/Service Provider network if the circuits are not properly provisioned

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s