Cisco UCM CAR (CDR) Web GUI Access Request (https:///car/)

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1_SU1/Administration/cucm_b_administration-guide-1151su1/cucm_b_administration-guide-1151su1_chapter_010.pdf

 

To provide a user to CAR (CDR)  (https://<CAR server IP Address>/car/) web page, the following two access groups must be associated with the user. After giving user this access, please test login to other areas of UCM GUI, so the users do not gain unapproved access to UCM Admin pages.

 

  1. Standard CCM End Users
  2. Standard Admin Rep Tool Admin = (Standard CAR Admin Users, Standard CCM Super Users)

 

CAR web gui

Putty Trick – 1. Save output to a file

To automatically save the output to a file while using Putty, you can change one setting of Putty to achieve this.
1. Start putty.exe.
2. Go to Session -> Logging.
3. Select “Printable output”
4. Choose the folder, where you want the file to be placed.
5. Append a file name like &H_&Y&M&D_&T.log to the path (host_YearMonthDay_time.log)
6. Save the profile as default settings.

CCNA Security 210-260 (Santos & Stuppi): Ch01 Questions

I have been away from study as well as blogging for sometime due to my on-going health issues. This year alone, I’ve had three operations and have been off the tangent on my study. Actually, two but the last one was a spin-off of the second. The first was in May, embarrassing to say this but the operation was for hemorrhoidectomy and colonoscopy, it brought me down for about 3 weeks. Then 3 weeks ago, I’ve had a Tonsillectomy, I was so glad that I was finally saying good bye to my beloved 40 year old tonsillitis. Post operation, I was almost over the hill, then on the 14th day, a scab came off the operated part and started bleeding crazy. Last Sunday, I went into Emergency and after almost bleeding to death for 8 hours, the ENT specicialist decided to operate on me again under full anesthetics. I was out for another week and looking forward to going back to work tomorrow. Sadly, I felt the pain up the bumb as well as in the mouth this year. Hopefully, I can keep my promise to completed the CCNA Security 210-260 before the year end. ;).

For anyone who is also struggling with their study, keep your forcus and keep going until you see the end of the tunnel. Yes, there are many tunnels to crosss in our industry, if you stop, you might get run over by the traffic behind you, so keep moving. 🙂

To help the exam prep and also make some go to points, I will simply refer the questions from the books. Yes, I did purchased a hard copy to study for this exam, the videos are also also available from safaribooks.com (Santos & Stuppi videos). Older Barker version is available off torrent sites as form of cbtnugget videos. Love watching Keith Barker’s cbtnuggets, he is a true  legend!

1. Which security term refers to a person, property, or data of value to a company?
a. Risk
b. Asset
c. Threat prevention
d. Mitigation technique
B

2. Which asset characteristic refers to risk that results from a threat and lack of a countermeasure?
a. High availability
b. Liability
c. Threat prevention
d. Vulnerability
D

3. Which three items are the primary network security objectives for a company?
a. Revenue generation
b. Confidentiality
c. Integrity
d. Availability
B C D

4. Which data classification label is usually not found in a government organisation?
a. Unclassified
b. Classified but not important
c. Sensitive but unclassified
d. For official use only e. Secret
B
5. Which of the following represents a physical control?
a. Change control policy
b. Background checks
c. Electronic lock
d. Access lists
C

6. What is the primary motivation for most attacks against networks today?
a. Political
b. Financial
c. Theological
d. Curiosity
B

7. Which type of an attack involves lying about the source address of a frame or packet?
a. Man-in-the-middle attack
b. Denial-of-service attack
c. Reconnaissance attack
d. Spoofing attack
D

8. Which two approaches to security provide the most secure results on day one?
a. Role based
b. Defense in depth
c. Authentication
d. Least privilege
B D

9. Which of the following might you find in a network that is based on a defense-in-depth security implementation? (Choose all that apply.)
a. Firewall
b. IPS
c. Access lists
d. Current patches on servers
A B C D

10. In relation to production networks, which of the following are viable options when dealing with risk? (Choose all that apply.)
a. Ignore it
b. Transfer it
c. Mitigate it
d. Remove it
B C D

Interview question: Cisco Voice Engineer: CUCM Database replication value, do you know what you are talking about?

This is a helpful reminder note for all who manages CUCM on day-to-day basis and one of the favorite Voice/IPTel Engineer interview questions. I think I was asked this question in almost every voice Engineer role interviews. Good luck with your next interview!

Q1. What does CUCM database replication value mean to you (CM Administrator)? 

2 = Good, excellent, no behind pain

Other than 2 = Behind pain begins

Value Meaning Description
0 Initialization State This state indicates that replication is in the process of trying to  setup. Being in this state for a period longer than an hour could  indicate a failure in setup.
1 Number of Replicates not correct This state is rarely seen in 6.x and 7.x but in 5.x can indicate its  still in the setup process. Being in this state for a period longer than  an hour could indicate a failure in setup.
2 Replication is good Logical connections have been established and tables match the other servers on the cluster.
3 Tables are suspect Logical connections have been established but we are unsure if tables match.
In 6.x and 7.x all servers could show state 3 if one server is down in  the cluster.
This can happen because the other servers are unsure if  there is an update to a user facing feature that has not been passed  from that sub to the other device in the cluster.
4 Setup Failed / Dropped The server no longer has an active logical connection to receive  database table across. No replication is occurring in this state.

Source: CCO

Q2. How to check?

Option 1: On CUCM OS CLI, run show command

admin:show perf query class “Number of Replicates Created and State of Replication”
==>query class :

– Perf class (Number of Replicates Created and State of Replication) has instances and values:
ReplicateCount -> Number of Replicates Created = 427
ReplicateCount -> Replicate_State = 2 <<< Life is Good

Option 2: On CUCM Unified Reporting 

Cisco Unified Reporting > System Reports > Unified CM Database Status >> Run report

 

%ec%82%ac%ec%9a%a9%ec%9e%90-%ec%a7%80%ec%a0%95-12%ec%82%ac%ec%9a%a9%ec%9e%90-%ec%a7%80%ec%a0%95-13

Option 3: Real Time Monitoring Tool (RTMT)

Install RTMT plugin on your desktop. Launch RTMT and then go to “Call Manager > Service > Database Summary”

Q3. How to repair a broken db replication issue?

I have come acorss a very good blog and it shows you on how to repair a broken db replication. Click here.

 

 

 

CCNA Security 210-260: Module 1: Fundamentals of Network Security, Lession 1: Networking Security Concepts and Common Principles

Source: CCNA Security 210-260, https://www.safaribooksonline.com/library/view/ccna-security-210-260/

Lesson 1: Networking Security Concepts and Common Principles
1.1 Understanding Network and Information Security Basics
1.2 Confidentiality, Integrity, and Availability
1.3 Classifying Assets
1.4 Types of Security Vulnerabilities
1.5 Classifying Countermeasures
1.6 Attack Methods & Vectors
1.7 Applying Fundamental Security Principles To Network Design
1.8 Understanding the Security Attack Surface in Different Network Typologies

================================================================

1.1 Understanding Network and Information Security Basics
Introduction
– Attacks are more targeted and sophisticated
– Custom malware created even at the victim’s site
– More organized attack campaigns

Every organization, individual or system is a target. Doesn’t matter the size/country/who.
You are a target, attackers are always target to steal:
– Intellectual Property
– Personal Information
– Distributed Development (source code)

Recent evolution of threats:
– Custom malware is being deployed
– Multiple bad actors are present simultaneously
– Attached infrastructure is a platform for the next attack
– Many are blind to network malfeasance
– Some are conceding loss of control
– Denial of Service can be a precursor to damage
– Undetected communication to embargoed countries

Today’s reality:
– Over 75% of attacks start extracting data within minutes.
– Over 50% of attacks are left undetected for months, if at all
– Detection and response capabilities must change
Security professionals must understand what they are trying to protect… and from WHOM?
We need to think like actors and bad guys, try to understand all the threats happening now days.

The Industrialization of hacking: Cyber crime as a business. Often the criminals know about your network that you know.
Threats grow more sophisticated every day.
1990 – 2000 Viruses
1997 – Phishing, low sophistication,
2000 – 2005 Worms
2005 – Hacking becomes an Industry
2005 – today: Spyware and rootkits
2015 – APTs cyber ware
2016 – Sophisticated attacks, attack as service
2020 – ???

“Criminals know more about your network than you do”
Initial malware may remain dormant for months to learn vulnerabilities and network custom malware developed to attack after learning your vulnerabilities.

Typical stages of a data breach:

1-1

What is a vulnerability?
A vulnerability is an exploitable weakness in a system or its design. Vulnerabilities can be found in protocols, operating systems, applications, and system designs.

What is a threat?
A threat is any potential danger to an asset. If a vulnerability exists but has not yet been exploited or, more importantly, it has not yet publicly known, the threat is not yet realized.
If someone is actively launching an attack against your system and successfully accesses something or compromises your security against an asset, the threat is realized.

What is a countermeasure?
A countermeasure is a safeguard that somehow mitigates a potential risk. It does so by either reducing or eliminating the vulnerability, or at least reduces the likelihood of the threat agent to actually exploit the risk.

 

1.2 Confidentiality, Integrity, and Availability

CIA concept:

2-1

Confidentiality means that only the authorized individuals/systems can view sensitive or classified information. This also implies that unauthorized individuals should not have any type of access to the data.

Integrity applies to systems and data. For data means that changes made to data are done only by authorized individuals/systems. Corruption of data is a failure to maintain data integrity.

Availability also applies to systems and to data. If the network or its data is not available to authorized users the impact may be significant to organizations and users who rely on that network as a business tool. The failure of a system, to include data, applications, devices, and networks, generally equates to loss of revenue.

 

1.3 Classifying Assets

What is an Asset?

An asset is an item that is to be protected and can include property, people and information/data that have value to the company.

This includes intangible items such as proprietary information or trade secrets and the reputation of the company.

The data could include company records, client information, proprietary software, and so on.

Asset classifications:

Type of classification Calssification
Governmental classifications * Unclassified
* Sensitive but unclassified (SBU)
* Confidential
* Secret
* Top secret
Private sector classifications * Public
* Sensitive
* Private
* Confidential
Classification criteria * Value
* Age
* Replacement cost
*Useful lifetime
Classification roles * Owner (the Group ultimately responsible for the data, usually senior management of a company)

* Custodian (the group responsible for implementing the policy as dictated by the owner)

* User (those who access the data and abide by the rules of acceptable use for the data)


1.4 Types of Security Vulnerabilities

Understanding the weaknesses and vulnerabilities in a system or network is a huge step toward correcting the vulnerability or putting in appropriate countermeasures to mitigate threats against those vulnerabilities.

Different types of security vulnerabilities

  • Policy flaws
  • Design errors
  • Protocol weaknesses
  • Misconfiguration
  • Software vulnerabilities
  • Human factors (weakest link, social engineering)
  • Malicious software
  • Hardware vulnerabilities
  • Physical access to network resources

 

Buffer overflows

  • Buffer
    • Data Container
  • Buffer overflow:
    • Stuffing too much data into a data container
    • Data written beyond the container overwrites other data and/or control information

 

Instruction Pointer (EIP)

  • Holds address of next instruction to execute
  • Is impacted by jumps, branches and returns
  • Is only valid if pointing to an executable memory region

 

What is the stack?

  • Holds all local variables and parameters used by any function
  • Remembers the order in which functions are called so the function returns correctly
  • When a function is called, local variables and parameters are “pushed” onto the stack
  • When the function returns, these locals and parameters are “popped” off of the stack

 

What does main’s frame look like on the stack?

What happens when we put more than 512 bytes in mybuffer[]?

What does main’s frame look like on the stack? We overwrite saved EBP, EIP, and more.

 

Target: EIP

Goal: Control execution flow

  • locate saved EIP
  • place a favorable address in the saved EIP
  • Don’t crash

 

Cross Site Scripting (XSS)

  • XSS is the ability to execute Javascript code within the Browser’s Document Object Model (DOM)
    • In non-web-tech-speak: Run scripts in the user’s context
    • The web application does not “taint” the data before it is stored and/or reflected back to the end user
  • Stored SSX:
    • Web application stores the attack in the database for later display
    • Common to attack multiple users on forums, etc
  • Reflected XSS:
    • Immediately attack the user based on input
    • Typically performed with social engineering when an XSS vulnerability is discovered on a trusted website

What is the threat from XSS?

  • Cookie stealing
  • Browser control
  • Forced actions (CSRF)
  • Enhanced social engineering

 

XSS “Cousin”: CSRF

  • Cross site request forgery
  • Exploits the trust a site has in a users browser
    • Typically uses social engineering or XSS to lure a user
  • Some mitigation:
    • Don’t allow “blind submissions” — Use a secret token
    • Check the refer header

<img src=”http://bank.example.com/withdraw?account=Alice&amount=1000000&for=Mallory”&gt;

 

SQL Injection

  • Dynamic web applications require database back ends
  • Developers don’t always sanitize user input before using it in SQL Queries

 

Additional Vulnerability categories

https://www.owasp.org/index.php/Category:Vulnerability

 

1.5 Classifying Countermeasures

        Classifying controls & countermeasures

1-5

Administrative Controls

  • These consist of written policies, procedures, guidelines and standards
    • Examples:
      • written acceptable use policy (AUP)
      • change control process that needs to be followed when making changes to the network
  • Administrative controls could involve items such as background checks for users

 

Physical Controls

Physical security for the network servers, equipment, and infrastructure.

Examples:

  • Door locks, gates, badge access
  • Cameras
  • a redundant system like an uninterruptible power supply

 

Logical Controls

  • These consist of passwords, firewalls, intrusion prevention systems, access lists, VPN tunnels, and so on.
  • Logical controls are often referred to as technical controls.

 

1.6 Attack Methods & Vectors

Attack methods

Most attackers do not want to be discovered and so they use a variety of techniques to remain in the shadows when attempting to compromise a network.

Attack methods: Reconnaissance

Used to find information about the network and the victim: Passive or Active

  • Passive: Studying user behaviors, social media etc.
  • Active: scans of the network to find out which IP addresses respond, and further scans to see which ports are open and what vulnerabilities are present.

This is usually the first step taken, to discover what is on the network and to determine potential vulnerabilities.

Attack methods: Social Engineering

  • Targets the weakest link: the user.
  • If the attacker can get the user to reveal information, it is much easier for the attacker than using some other method of reconnaissance.

Examples:

  • Phishing presents a link that looks like a valid trusted resource to a user. When the user clicks it, the user is prompted to disclose confidential information such as usernames/passwords.
  • Pharming is used to direct a customer’s URL from a valid resource to a malicious one that could be made to appear as the valid site to the user. From there, an attempt is made to extract confidential information from the user.

Attack methods: Privilege Escalation

The process of taking some level of access (whether authorized or not) and achieving an even greater level of access.

Example: an attacker who gains user mode access to a router and then uses a brute-force attack against the router, determining what the enable secret is for privilege level 15 access.

Attack methods: Backdoors

An application can be installed to either allow future access or to collect information to use in further attacks.

Many back doors are installed by users clicking something without realizing the link they click or the file they open is a threat. Back doors can be also be implemented as a result of a virus or a worm (often referred to as malware).

Attack methods: Remote code execution

  • One of the most devastating actions available to an attacker is the ability to execute code within a device.
  • Code execution could result in an adverse impact to the confidentiality (attacker can view information on the device), integrity (attacker can modify the configuration of the device), and availability (attacker can create a denial of service through the modification of code) of a device.

Attack methods: Man-in-the-Middle Attacks

  • A man-in-the-middle attack results when attackers place themselves in line between two devices that are communicating, with the intent to perform reconnaissance or to manipulate the data as it moves between them.
  • This can happen at Layer 2 or Layer 3.
  • The main purpose is eavesdropping, so the attacker can see all the traffic.

Attack methods: Denial-of-service (DoS) and Distributed Denial-of-Service (DDoS) Attacks

  • When numerous or hundreds/thousands of systems send traffic to a victim and this produces a denial of service condition where the genuine users cannot access the site and unable to use the service. Covered in depth in lesson 2.

Attack methods: Botnet & Command & Control (CnC)

  • A botnet is group of private computers that are infected by malware and controlled by attacker, performing malicious activities. Some activities include, sending spams, carry on denial of service attacks from these private computers.
  • Bots are controlled by CnC (Command & Control) server. Historically the CnC control is operated over IRC (Internet Relay Chat), in recent times, CnC control can be done through TLS/SSH/IPSec tunnels. Also, twitter is used for CnC control environment. Infected machines are controlled by the bad actors to carry out specific attacks. Sending spam or steal information from victims.

 

1.7 Applying Fundamental Security Principles To Network Design

Examples of guidelines for secure network architecture:

  • Rule of least privilege – give a user or a system just enough privilege to carry out certain tasks
  • Defense in depth –  a layer approach on how to apply security within an organization
  • Separation of duties – a concept of having more than one person completing a task to prevent fraud, malicious activities or errors

 

Improving Security Posture:

1-7

 

1.8 Understanding the Security Attack Surface in Different Network Typologies

  • We need to understand security attack surface in different network typologies and environments, including BYOB (Bring Your Own Device), firewalls, Mobile device Management (MDM), Identity Management Systems (IDS) and other devices within security network environment. Different technologies covered in detail in later chapters.
  • DC environment – it is also important to understand different types of threats in DC’s. Example, The North-South traffic is the traffic carried to and from the data center and other parts of the network. On the other hand, the East-West traffics is referred to as lateral movement within the data center. Whenever there is a security compromise, it is important to know how traffics flow as often the traffic from the compromised machine traverses both from/to North-South and East-West directions.

 

 

 

CIPT2: 300-075 Taming the beast and my study note

Wow, what an experience it was, trying to pass Cisco CIPT2 300-075 exam during the last 5 weeks. So much was on the line as if I did not pass this exam by 17th of June, 2016, all my CCNP R&S and CCNP Voice was expiring, so I would be facing 7 exams to re-certify as CCNP in both technologies. Unfortunately, I had to tackle it 3 times to pass this exam, and got lucky on 3rd attempt. My first attempt was a lame attempt as I failed by 7 questions, the second attempt was a little bit more decent, failing by a SINGLE question. The passing mark for CIPT2 300-075 exam is 860/1000, which makes one question valued somewhere between 13 pts to 17 pts depending on the weight of the question Cisco is throwing at you. But today, I passed the exam and what a Roller Coaster ride this exam was, I’ve passed the exam with the exact passing score! Finally, the lady luck is on my side. After two failures, trying to tame the beast, I’ve studied so many hours trying to understand the VCS components and finally got a full grasp of the concept and basic configuration. Over 3 days of long weekend, I cranked out 30 hours of study time for VCS C and E studies (no pain, no gain! I am thankful that I’ve failed the second time by one question. I was forced to try my best). Oh, what a feeling!

 

I want to share some of my study notes with you so, you don’t have to do it the hard way like me, but I urge you to spend some time reading Cisco documentations, watch videos from CiscoLive and read the official study books front-to-end before jumping into the full study drive mode. I hope my notes will help someone on their way to becoming a CCNP-Collaboration. My notes are based on Cisco documents but also comes from the live environment and my experience, so it might not be 100%, but if you disagree with me on those questions, then show me your proof that you are in the right and I am in the wrong with a live Cisco documentations referencing the page and line number. As always, if you cannot avoid it, try to face it with a dignity or try to enjoy it!!! I would choose the latter…. 🙂

 

 

1. Regional configuration of Cisco VoIP environment
Note: Cisco Best practice, (G.729/24K) to compress BW for regions. Hardware MTP only supports G.711 a-law and G.711 u-law. Also regions will need transcoders if multiple codecs are deployed, NOT hardware MTP.
2. While using Query wizard to configure the trace and log central feature to collect install logs.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/7_1_2/rtmt/RTMT/rttlc.html
“The time zone of the client machine provides the default setting for the Select Reference Server Time Zone field. All the standard time zones, along with a separate set of entries for all time zones that have Daylight Saving settings, display in the Select Time Zone drop-down list box.”
“Trace and Log Central downloads the file with a time range that is based on your Selected Reference Server Time Zone field. If you have servers in a cluster in a different time zone, TLC will adjust for the time change and get files for the same period of time. For example, if you specify files from 9:00 AM to 10:00 AM and you have a second server (server x) that is in a time zone that is one hour ahead, TLC will download files from 10:00 AM to 11:00 AM from server x.”
3. Standardization of caller addresses between H.323 and SIP endpoints.
http://www.cisco.com/en/US/tech/tk652/tk701/technologies_configuration_guide_chapter09186a00 800eadee.htmlhttp://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-2/Cisco-VCS-Basic-Configuration-Control-with-Expressway-Deployment-Guide-X8-2.pdf (Page 17)
“The pre-search transform configuration described in this document is used to standardize destination aliases originating from both H.323 and SIP devices. ”
“The following transform modifies the destination alias of all call attempts made to destination aliases which do not contain an ‘@’. The old destination alias has @example.com appended to it. This has the effect of standardizing all called destination aliases into a SIP URI format.”
From VCS and CUCM Deployment guide:
“Thus, a transform is needed to ensure that the dialed number is transformed into a consistent form, in this case to add the domain (vcs.domain) if required.”
4. CUCM Extension Mobility characteristics
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a0080153e60.html#wp1092734

“Able to adopt a user profile even when no user is logged in”
“Almost same attributes as a physical device”
5. A globalized dial plan, 3 ways enabling ingress gateways to process calls.

Configure the called-party transformation settings for incoming calls on H.323 gateways.
Configure translation patterns in the partitions used by the gateway calling search space
Configure the gateway with prefix digits to add necessary country and region codes.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab10/collab10/dialplan.html#16685
“Localized Call Ingress on Gateways
The called and calling numbers delivered into the Unified Communications system by external networks (for example, the PSTN) are typically localized. The form of the numbers may vary, depending on the service provider’s configuration of the trunk. As a gateway is connected to a PSTN trunk, the system administrator must work with the PSTN service provider to determine the applicable signaling rules to be used for this specific trunk. As calls are delivered into the system from the trunk, some of the information about the calling and called numbers will be provided explicitly and some of it will be implied. Using this information, the system must derive the calls’ globalized calling and called party numbers.
The globalization of the called party number can be implemented through one of the following methods:
In the gateway configuration, configure Call Routing Information > Inbound Calls, where the quantity of significant digits to be retained from the original called number and the prefix digits to be added to the resulting string are used to globalize the called number. The prefix digits should be used to add the applicable + sign and country, region, and city codes.
Place translation patterns in partitions referenced by the gateway’s calling search space. The translation patterns should be configured to match the called party number form used by the trunks connected to the gateway, and should translate it into the global form. The prefix digits should be used to add the applicable + sign and country, region, and city codes.
Use the incoming call’s called party transformation settings available on the gateway and on the gateway’s device pool. There you can define strip and prefix digit instructions or alternatively configure a called party transformation calling search space per numbering type.
The globalization of the calling party number should be implemented by using the Incoming Calling Party Settings configured either on the gateway directly or in the device pool controlling the gateway.”
6. 2 types of devices are affected when an engineer changes the DSCP for Video Calls service parameter
Read “Set DSCP Values”.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_6/CJAB_BK_C56DE1AB_00_cisco-jabber-106-deployment-and-installation-guide/CJAB_BK_C56DE1AB_00_cisco-jabber-106-deployment-and-installation-guide_appendix_01111.html
7. Cisco VCS uses 3 Presence status of endpoints for monitoring
http://www.cisco.com/c/en/us/td/docs/telepresence/infrastructure/articles/vcs_monitors_presence_ status_endpoints_kb_186.html
in-all
call-ended
registration
8. 3 steps configure Cisco Unified Survivable Remote Site Telephony for SIP phones

1. configure an SRST reference
2. Configure the SIP registrar
3. Configure voice register pool

 

 

voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip

sip

registrar server expires max 600 min 60

!

voice register pool 10
id network 172.26.10.0 mask 255.255.255.0
dtmf-relay rtp-nte cisco-rtp sip-notify
codec g711ulaw
no vad
!
voice register pool 11
id network 172.26.11.0 mask 255.255.255.0
dtmf-relay rtp-nte cisco-rtp sip-notify
codec g711ulaw
no vad
!

sip-ua
registrar ipv4:172.26.10.240 expires 600

(172.26.10.240 is the SRST gateway IP address).

Don’t forget on UCM SRST reference configuration for gateway:

On UCM SRST reference configuration for gateway

SIP Network/IP Address 172.26.10.240

SIP Port 5060
9. Device Mobility – overlapping parameters for roaming
Location
Network Locale
MRGL

Reference: https://supportforums.cisco.com/document/77096/device-mobility
“The overlapping parameters for roaming-sensitive settings are Media Resource Group List, Location, and Network Locale. The overlapping parameters for the Device Mobility-related settings are Calling Search Space (called Device Mobility Calling Search Space at the device pool), AAR Group, and AAR Calling Search Space. Overlapping parameters configured at the phone have higher priority than settings at the home device pool and lower priority than settings at the roaming device pool.”
10. VCS Control routing configuration, user dial brchoi and call gets routed to brchoi@cisco.com
search rule

http://www.manualslib.com/manual/841592/Cisco-Telepresence.html?page=168

http://www.cisco.com/en/US/tech/tk652/tk701/technologies_configuration_guide_chapter09186a00 800eadee.htmlhttp://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-2/Cisco-VCS-Basic-Configuration-Control-with-Expressway-Deployment-Guide-X8-2.pdf (Page 17)
“The pre-search transform configuration described in this document is used to standardize destination aliases originating from both H.323 and SIP devices. The following transform modifies the destination alias of all call attempts made to destination aliases which do not contain an ‘@’. The old destination alias has @example.com appended to it. This has the effect of standardizing all called destination aliases into a SIP URI format.”
From VCS and CUCM Deployment guide:
“Thus, a transform is needed to ensure that the dialed number is transformed into a consistent form, in this case to add the domain (vcs.domain) if required.”
11. Configure VG310/VG350 and enable call pickup feature
SCCP gateway
You must check this on a running CUCM. Check CUCM configuration and VG350 gets configurred as SCCP only and then the endpoints can be configured to do a call pick-up.
Check CUCM configuration and VG350 gets configurred as SCCP only and then the endpoints can be configured to do a call pick-up.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmsys/CUCM_BK_SE5FCFB6_00_cucm-system-guide-100/CUCM_BK_SE5FCFB6_00_cucm-system-guide-100_chapter_0100110.html#CUCM_RF_V83D221A_00
12. Intracluster URI dialing configuration

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_0_1/ccmsys/CUCM_BK_CD2F83FA_00_cucm-system-guide-90/CUCM_BK_CD2F83FA_00_system-guide_chapter_0101111.html#CUCM_TK_SBE2D597_00

URI Dialing within the same cluster, follow these steps:
Step 1: Configure the URIs to the users
Step 2: Associate the directory URIs to directory numbers
Step 3: Assign the default directory URI (Configure the directory URI partition and calling search space)
Step 4: Configure the SIP profile in your network. (Configure a setting for the Dial String Interpretation drop-down list box and apply the setting for all the SIP profiles in your network. Check the Use Fully Qualified Domain Name in SIP Requests check box for all the SIP profiles in your network.)
13. Enabling video desktop sharing between CUCM video endpoint and Cisco VCS video endpoint.
Use BFCP
https://www.ciscolive.com/online/connect/sessionDetail.ww?SESSION_ID=88574&backBtn=true
BRKCOL-2540 – Video call control and management migration to CUCM (2015 Cancun) – 90 Mins

22222

 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/bccm-861-cm/b06siprf.html
Table 76-1 SIP Profile Configuration Settings
Allow Presentation Sharing using BFCP
If the box is checked, Cisco Unified Communications Manager is configured to allow supported SIP endpoints to use the Binary Floor Control Protocol to enable presentation sharing.
The use of BFCP creates an additional media stream in addition to the existing audio and video streams. This additional stream is used to stream a presentation, such as a PowerPoint presentation from someone’s laptop, into a SIP videophone.
If the box is unchecked, Cisco Unified Communications Manager rejects BFCP offers from devices associated with the SIP profile by setting the BFCP application line and associated media line ports to 0 in the answering SDP message. This is the default behavior.
Note BFCP is only supported on SIP networks. BFCP must be enabled on all SIP trunks, lines, and endpoints for presentation sharing to work. BFCP is not supported if the SIP line or SIP trunk uses MTP, RSVP, TRP or Transcoder.
For more information on BFCP, refer to the Cisco Unified Communications Manager System Guide.
14. “Src-port=”25723″ Detail=”Incorrect authentication credential for user”” error
The Expressway-C Traversal Client username/password do not match the Expressway-E Traversal Server username/password.

https://www.ciscolive.com/online/connect/sessionDetail.ww?SESSION_ID=89093&backBtn=true

The Expressway-C is a Client and the Expressway-E is the server. They have client to server relationship. Expressway-C is a Traversal Client.

1111
http://www.cisco.com/c/en/us/support/docs/unified-communications/expressway-series/117811-configure-vcs-00.html

Traversal Zone

When the peer address is configured as an IP address or the peer address does not match the Common Name (CN), you see this in the logs:

Event=”Outbound TLS Negotiation Error” Service=”SIP” Src-ip=”10.48.80.161″
Src-port=”25697″ Dst-ip=”10.48.36.171″ Dst-port=”7001″ Detail=”Peer’s TLS
certificate identity was unacceptable” Protocol=”TLS” Common-name=”10.48.36.171″
When the password is incorrect, you see this in the Expressway-E logs:

Module=”network.ldap” Level=”INFO”: Detail=”Authentication credential found in
directory for identity: traversal”

Module=”developer.nomodule” Level=”WARN” CodeLocation=”ppcmains/sip/sipproxy/
SipProxyAuthentication.cpp(686)” Method=”SipProxyAuthentication::
checkDigestSAResponse” Thread=”0x7f2485cb0700″: calculated response does not
match supplied response, calculatedResponse=769c8f488f71eebdf28b61ab1dc9f5e9,
response=319a0bb365decf98c1bb7b3ce350f6ec

Event=”Authentication Failed” Service=”SIP” Src-ip=”10.48.80.161″
Src-port=”25723″ Detail=”Incorrect authentication credential for user”
Protocol=”TLS” Method=”OPTIONS” Level=”1″
15. An effective backup method to access TEHO destinations in case the call limit triggers
LRG

https://books.google.com.au/books?id=80iuCwAAQBAJ&pg=PT151&lpg=PT151&dq=device+pool+used+to+globalize+dial+plan&source=bl&ots=uyI8e5Jt4L&sig=hZ-hEJ-XCgJT7pZHCrGR89Q5TR4&hl=en&sa=X&ved=0ahUKEwi0n-33iqLNAhXFIqYKHWdaAVEQ6AEIQjAF#v=onepage&q=device%20pool%20used%20to%20globalize%20dial%20plan&f=false
“If TEHO is configured, the appropriate TEHO Gateway is used for the PSTN call. The TEHO route list can include the Default Local Route Group setting as a backup path. In this cas, if the primary (TEHO) path is not available, the gateway taht is referenced by the local route group of the applicable device pool will be used for the backup path. If the device pool selection is not static, but Cisco Unified device mobility is used, the gateway of the roaming site will be used as a backup for the TEHO path. …”
16. Functionalities of subzones in a Cisco VCS deployment
Apply registration, authentication, and media encryption policies
Manage bandwidth to restrict standard definition endpoints from using more than 2 Mb of bandwidth.

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/admin_guide/Cisco_VCS_Administrator_Guide_X7-2.pdf (Page 127)

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/admin_guide/Cisco-VCS-Administrator-Guide-X8-7-2.pdf (Page 154)

Bandwidth management
The Local Zone’s subzones are used for bandwidth management. After you have set up your subzones you can apply
bandwidth limits to:
– individual calls between two endpoints within the subzone
– individual calls between an endpoint within the subzone and another endpoint outside of the subzone
– the total of calls to or from endpoints within the subzone

For full details of how to create and configure subzones, and apply bandwidth limitations to subzones including the
Default Subzone and Traversal Subzone, see the Bandwidth control section.

Registration, authentication and media encryption policies
In addition to bandwidth management, subzones are also used to control the VCS’s registration, authentication and
media encryption policies.
17. Enabling SAF Call Control Discovery
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_0_2/ccmfeat/fsgd-802- cm/fscallcontroldiscovery.pdf
1. the SIP or H.323 trunk
2. hosted DN patterns
3. Hosted DN groups
18. Cisco VCS Expressway traversal call licenses
http://www.cisco.com/c/en/us/support/docs/unified-communications/telepresence-video-communication-server-vcs/118872-technote-vcs-00.html
According to the document VCS, Gatekeepers and Border Controllers. SIP Trunk is treated as a device by Cisco, but it is not a real device, so not used for licensing.
19. Devices or applications support call preservation
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_0_1/CUCM_BK_CD2F83FA _00_cucm-system-guide-90/CUCM_BK_CD2F83FA_00_system- guide_chapter_01011.html#CUCM_RF_C98194B0_00

The following devices and applications support call preservation. If both parties connect through one of the following devices, Cisco Unified Communications Manager maintains call preservation:
Cisco Unified IP Phones
SIP trunks
Software conference bridge
Software MTP
Hardware conference bridge (Cisco Catalyst 6000 8 Port Voice E1/T1 and Services Module, Cisco Catalyst 4000 Access Gateway Module)
Transcoder (Cisco Catalyst 6000 8 Port Voice E1/T1 and Services Module, Cisco Catalyst 4000 Access Gateway Module)
Non-IOS MGCP gateways (Catalyst 6000 24 Port FXS Analog Interface Module, Cisco DT24+, Cisco DE30+, Cisco VG200)
Cisco IOS H.323 gateways (such as Cisco 2800 series, Cisco 3800 series)
Cisco IOS MGCP Gateways (Cisco VG200, Catalyst 4000 Access Gateway Module, Cisco 2620, Cisco 3620, Cisco 3640, Cisco 3660, Cisco 3810)
Cisco VG248 Analog Phone Gateway

The following devices and applications do not support call preservation:
Annunciator
H.323 endpoints such as NetMeeting or third-party H.323 endpoints
CTI applications
TAPI applications
JTAPI applications
Call Preservation Scenarios
20. Global Dial Plan Replication prevent the local cluster from routing VIP number 6666666666 to the remote cluster.
Create a block learned pattern.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_011101.html#CUCM_RF_L56BD6F6_00
Learned pattern can be configured but there is no mentioning of transformation pattern configuration. “Create a block learned pattern” can be used to prevent Global Dial Plan Replication within local cluster.
21. URI calling within the same cluster configuration

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_0_1/ccmsys/CUCM_BK_CD2F83FA_00_cucm-system-guide-90/CUCM_BK_CD2F83FA_00_system-guide_chapter_0101111.html#CUCM_TK_SBE2D597_00

URI Dialing within the same cluster, follow these steps:
Step 1: Configure the URIs to the users
Step 2: Associate the directory URIs to directory numbers
Step 3: Assign the default directory URI (Configure the directory URI partition and calling search space)
Step 4: Configure the SIP profile in your network. (Configure a setting for the Dial String Interpretation drop-down list box and apply the setting for all the SIP profiles in your network. Check the Use Fully Qualified Domain Name in SIP Requests check box for all the SIP profiles in your network.)
22. 2 steps must you take when implementing TEHO in your environment
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/7x/uc7_0/dialplan.html
Implement local failover
Implement centralized failover
23. Globalization dialing functions enhancement since CUCM 7.X and later
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/9x/uc9x/dialplan.html (benefits of new design approach)
AAR
CER
TEHO
24. 2 commands verify Cisco IP Phone registration
show ephone registered
show sip-ua status registrar

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/troubleshooting/guide/ts_phreg.html (see the steps)

Step 3 show sip-ua status registrar

Use this command to display all the SIP endpoints currently registered with the contact address.

Router# show sip-ua status registrar

Line destination expires(sec) contact
============ =============== ============ ===============
91021 192.168.0.3 227 192.168.0.3
91011 192.168.0.2 176 192.168.0.2
95021 10.2.161.50 419 10.2.161.50
95012 10.2.161.50 419 10.2.161.50
95011 10.2.161.50 420 10.2.161.50
95500 10.2.161.50 420 10.2.161.50
94011 10.2.161.40 128 10.2.161.40
94500 10.2.161.40 129 10.2.161.40

I have cross checked with my Voice Gateway and found that ‘show ephone registered’ and ‘show sip-ua status registrar’.

Router#show ephone registered

ephone-1[0] Mac:6C30.4D57.8CD5 TCP socket:[1] activeLine:0 whisperLine:0 REGISTERED
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 debug:0
IP:10.30.11.34 * 7962 keepalive 4929 music 0 1:101 CM Fallback
sp1:01800008584 sp2:01800654112 sp3:00362456600

ephone-2[1] Mac:555D.0608.45B6 TCP socket:[-1] activeLine:0 whisperLine:0 UNREGISTERED
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 debug:0
IP:10.30.11.15 * 6921 keepalive 7 music 0

ephone-3[2] Mac:448D.0407.6BE9 TCP socket:[4] activeLine:0 whisperLine:0 REGISTERED
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 debug:0
IP:10.30.11.124 * 6921 keepalive 4938 music 0 1:103 CM Fallback

ephone-4[3] Mac:544D.0907.532C TCP socket:[12] activeLine:0 whisperLine:0 REGISTERED
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 debug:0
IP:10.30.11.25 * 6921 keepalive 4931 music 0 1:2 CM Fallback
25. Enalbe presence and extension mobility to branch office phones during a WAN failure. Cisco Unified Communications Manager Express in SRST mode

http://www.ciscopress.com/articles/article.asp?p=1744068&seqNum=4
Cisco Unified SRST does not support enhanced features, such as Presence or Cisco Extension Mobility. Message Waiting Indicator (MWI) is also not supported in fallback mode.

 

26. Configured a Cisco EX60 to register with a Cisco VCS Control, but phone is not registering with VCS C. What’s missing in the configuration.
http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/X8-1/Cisco-VCS-Basic-Configuration-Single-VCS-Control-Deployment-Guide-X8-1.pdf

EX60 (uses H.323 and SIP protocol)
H.323 ID user.two.mxp@example.com
H.323 E.164 7654321
Gatekeeper IP Address vcsc.internal-domain.net
SIP URI user.two.mxp@example.com
SIP Proxy1 vcsc.internal-domain.net
EX90 (uses SIP protocol)
SIP URI user.one.ex90@example.com
SIP Proxy1 vcsc.internal-domain.net
27. Your company’s internal number is 4 digit dialing, how to present this as 10-digit number to external clients?
Use “calling party transformation pattern”
https://supportforums.cisco.com/discussion/9848251/external-phone-mask-vs-calling-party-transformation-mask
“An advantage of using Calling Party Transformation Mask is that it allows you to change the Calling party number for a bunch of phones easily. Lets say you have a 100 phones that you need to change the 10 digit number. Rather than going to each phone and change the setting individually, you can do it at the Calling Party tranformation mask.”
“Another advantage is that if you want to change Calling Party number that gets displayed to external users, you can modify that easily with the transformation masks. It also gives you the flexibility of sending different calling party numbers to differnt destinations. For example, for local calls you can dislay the 7 digit number; for long distance you can display 10 digits and for international you can display country code +10 digits.”
28. Default region configurable items on CUCM?
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_0_1/ccmcfg/bccm-801- cm/b02regio.html#wp1077135
Audio Codec
Video Call Bandwidth
Link Loss Type
29. During Intercluster URI dialing, an error message “Local cluster cannot connect to the ILS network” comes up, what could be possible issues?
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_0_1/ccmfeat/CUCM_BK_CEF0C471_00_cucm-features-services-guide-90/CUCM_BK_CEF0C471_00_cucm-features-and-services-guide_chapter_011111.pdf (Page. 8)
The Tomcat certificates do not match.
The ILS authentication password does not match.
One cluster is using TLS certificate, and the other is using Password.
30. 2 technologies not utilising MTP.
http://www.cisco.com/c/en/us/td/docs/ios/voice/cube/configuration/guide/vb_8241.html

DTMF inband RTP-NTE (rfc2833)

SIP Delay Offer

Note 1: H.323 fast start:
https://learningnetwork.cisco.com/thread/65786
DTMF inband RTP-NTE (rfc2833) requires MTP only in CM 4.0, 5 and in later versions of CUCM, and lMTP requirement was removed when supporting RFC 2833 DTMF)

Note 2: If both endpoints support NTE, then no MTP is required. http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/media.html#wp1046314

CCNP DC – 642-997 DCUFI Exam, DnD

Hope this will help you to prepare for 642-997 DCUFI exam.

 

Q1. DC Design Layer Characteristics

DnD01

 

Q2. Cisco Nexus Design Layer and Features

DnD02

 

Q3. Cisco Nexus Product Family Features

DnD03

 

Q4. FCoE Protocol and Fibre Channel features

DnD04.png

 

Q5. VSAN and SAN Zoning

DnD05

Good luck to your study everyone! 🙂